Products

1
Yes
None
1
1000000
/products/
Thumbnail

Categories:

Sub-Categories:

Steel Plants
Ferro Silicon
Ferro Silicon Image

Specification

Si – 75 % / 72 % min Al – 1.5 % – 2.0 % max C – 0.2 % max
S – 0.03 % / 0.04 % max
P – 0.04 % / 0.05 % max
Size: As per buyer’s option
Silicon Manganese
Silicon Manganese Image

Specification

Mn – 60 % min / 65%min Si – 14% min / 16-18 % C – 2 % max
P – 0.03 % max S – 0.04 % Max Size : As per buyer’s option
Ferro Phosphorous
Ferro Phosphorous Image

Specification

P – 23 – 25 % min Si – 2 % min. C – 1 % max.
Mn – 2 % max S – 0.5 % max. Size: As per buyer’s option.

Packing : In 1MT big bags

Application : Used in the production of phosphoric iron and certain free cutting steels.

Ferro Manganese
Ferro Manganese Image

Specification

High Carbon-feMn Mn: 75%min C: 6-8% S:0.03%max P:0.3%max Si:2%max
Med.Carbon-FeMn

Mn:75%min C:2.5%max S:0.03%max P:0.35%max Si:2%max

Packing : In 1MT big bags

Application : Available as a high carbon grade and complemented by a range of low and medium carbon alloys together with a special nitride Ferro manganese proving the steel maker with the ability to add nitrogen in controlled amounts.

Ferro Chrome
Ferro Chrome Image

Specification

Cr – 60 – 70%max Si – 3.5 % max C – 6 – 8 % max
S – 0.03 % max P – 0.03 % max Size : As per buyer’s option

Packing : In 1MT big bags

Application : Chromium is a vital alloying element in Iron and Steel. It promotes corrosion and Oxidation resistance and aids high temperature strength.

Hard Coking Coal
Hard Coking Coal Image

Specification

Parameter Value
Moisture 8.0 % Max
Ash (Dry) 10 % Max
Sulphur (Dry) 0.65 To 0.95 max
Volatile (Dry) 24 % – 28 % Max
FSI 7 – 9
Reflectance 1.1 % – 1.5 %
Fluidity 500DDPM Min
Size 2 inch or less
Ph

Max 0.03 %
Na2O and K2 O Max. 3.0 %
Metallurgical Coke
Metallurgical Coke Image

Specification

Parameter Value
Total Moisture 5 % Max
Ash 12 – 13 Max
CSR 62 % Min
CRI 22 – 26 %
M40 82 % Min
M10 9 % Max
Sulphur 0.7 % Max
Phosphorous 0.02 % Max
Fixed Carbon 86 % Min
Size 25mm – 80mm (90%Min)
Foundary Coke
Foundary Coke Image

Specification

Parameter Value
Total Moisture 5 % Max
Ash 10% – 12%
CSR 60% Min
CSI 30% Min
Fixed Carbon 86% and above
Size 80mm – 150mm
Aluminium Smelters
Aluminium Fluoride
Aluminium Fluoride Image

Aluminium Fluoride, molecular formula: ALF3 is mainly used to adjust the molecular ratio in aluminium electrobath, lowers the smelting point of media and increase the conductivity of electrolyte. It is also used as the inhibitor in alcoholic Fermentation, the flux of vitreous enamel around the ceramics and the flux of the non – iron metal. Aluminium Fluoride is also used in the manufacture of aluminium silicate and in the glass industry as filler.

Specification: (ALF3)

Parameter
Value

AlF3 Purity

90 % Minimum

SiO2

0.28 % Max

0.20 % Max

Fe2O3

0.05 % Max

SO4

0.50 % Max

P2O5

0.012 % Max

Na2O

0.67 % Max

LOI at 550 ˚C for ½ Hrs: 1.00 % Max

Free Al2O3

9.00 % Max

Bulk Density

1300 kg / m3 min

+20 mesh

Nil

– 325mesh

25 % Max

ANGLE OF REPOSE

35˚

FLOWABILITY

60SEC MAX

CaO

0.098 % Max

Synthetic Cryolite
Synthetic Cryolite Image

Specification: Na3AlF6

Parameter Value

Total Fluorine as F

53 % Min

Aluminium as Al

12 – 14 %

Soduim as Na

30.5 – 34 %

Silica as SiO2

0.25 % Max

Iron as Fe2O3

0.10 % Max

P2O5

0.01 Max

Moisture at 120 C

0.2 max

Free Al2O3

1.0 Max

Sulphate as SO3

0.5 Max

LOI at 550 for 30mins

0.5 Max

Molar ratio as NaF / AlF3

1.5 Max

Bulk Density

1000kg /M3 min

Application: As a flux in Primary Aluminium Smelting, as a filler in Abrasive Industry and as a flux in Ceramic / glass industry.

Calcined Petroleum Coke
Calcined Petroleum Coke Image

Petroleum Coke is Calcined (roasted at high temperatures, 1200˚ to 1350˚ C) usually in gas fired rotary Kiln or coke oven or shaft kiln to remove moisture, drive off volatile matte, increase the density of the coke structure, increase physical strength, and increase the electrical conductivity of the material. The result is a hard dense, carbon (Calcined petroleum coke) with low hydrogen content and good electrical conductivity. These properties along with low metals and ash contents make calcined petroleum coke the best material currently available for making carbon anode for smelting of alumina to aluminium.

Specification:

Parameter

Grade 1

Grade 2

Ash

0.35 % Max

0.60 % Max

Moisture

0.3% Max

0.40 % Max

Volatile Matter

0.5 % Max

0.50 % Max

Sulphur

3.00 % Max

1.00 % Max

Iron as Fe

0.035 % Max

0.035 % Max

Si

0.035 % Max

0.030 % Max

Ti

0.020 % Max

0.0030 % Max

V

0.025 % Max

0.013 % Max

Ni

0.025 % Max

0.025 % Max

Sodium

0.010 % Max

0.010 % Max

Calcium

0.03 % Max

0.045 % Max

Na+Ca

0.035 % Max

 

Real Density

2.06 – 2.09gm / cc

2.04 – 2.07 gm /cc

Vibrated Bulk Density
(-8 to + 14 Tyler mesh)

 

0.8gm / cc Min

 

0.800gm / cc Min

Electrical Resistivity

520 micro ohm Max

550 micro ohm m

Screen Analysis:

 

(-)1.18mm

30 % Max

(-) 6.35 to +1.18mm

Balance (45 %)

(-) 19 to + 6.35mm

25 %Min

SIEVE SIZE:

+4 MESH

30.00 % Min

-200MESH

3.00 % Max

Construction and Mining
Excavators
Excavators Image

Excavators

Loaders
Loaders Image

Loaders

Tractors
Tractors Image

Tractors

Bulldozers
Bulldozers Image

Bulldozers

Dump Trucks
Dump Trucks Image

Dump Trucks

Crushers
Crushers Image

Crushers

Graders
Graders Image

Graders

Compactors
Compactors Image

Compactors

Trailers
Trailers Image

Trailers

Automotive
Alternators
Suspension
Suspension Image

Suspension

Lubricants
Filters
Filters Image

Filters

Engine Parts
Brake Shoes
Brake Shoes Image

Brake Shoes

Brake Sensors
Brake Sensors Image

Brake Sensors

Brake Pads
Brake Pads Image

Brake Pads

Brake Discs
Belts
Batteries
Batteries Image

Batteries

Air conditioning
Air conditioning Image

Air conditioning

Tyres
Tyres Image

Tyres

Steel Plants
Ferro Silicon Image
Ferro Silicon
Specification Si – 75 % / 72 % min Al – 1.5 % – 2.0 % max C – 0.2 % max ... Read More
Silicon Manganese Image
Silicon Manganese
Specification Mn – 60 % min / 65%min Si – 14% min / 16-18 % C – 2 % max P – 0.03 % max... Read More
Ferro Phosphorous Image
Ferro Phosphorous
Specification P – 23 – 25 % min Si – 2 % min. C – 1 % max. Mn – 2 % max ... Read More
Ferro Manganese Image
Ferro Manganese
Specification High Carbon-feMn Mn: 75%min C: 6-8% S:0.03%max P:0.3%max Si:2%max ... Read More
Ferro Chrome Image
Ferro Chrome
Specification Cr – 60 – 70%max Si – 3.5 % max C – 6 – 8 % max S – 0.0... Read More
Hard Coking Coal Image
Hard Coking Coal
Specification Parameter Value Moisture 8.0 % Max Ash (Dry) 10 % Max... Read More
Metallurgical Coke Image
Metallurgical Coke
Specification Parameter Value Total Moisture 5 % Max Ash 12 – 1... Read More
Foundary Coke Image
Foundary Coke
Specification Parameter Value Total Moisture 5 % Max Ash 10% – ... Read More
Aluminium Smelters
Aluminium Fluoride Image
Aluminium Fluoride
Aluminium Fluoride, molecular formula: ALF3 is mainly used to adjust the molecular ratio in aluminium electrobath, lowers the smelting point of media and increase the conductivity of electrolyte. It is also used as the inhibitor in alcoh... Read More
Synthetic Cryolite Image
Synthetic Cryolite
Specification: Na3AlF6 Parameter Value Total Fluorine as F ... Read More
Calcined Petroleum Coke Image
Calcined Petroleum Coke
Petroleum Coke is Calcined (roasted at high temperatures, 1200˚ to 1350˚ C) usually in gas fired rotary Kiln or coke oven or shaft kiln to remove moisture, drive off volatile matte, increase the density of the coke structure, increase ... Read More
Construction and Mining